THE 7-PC PLATINUM SERIES SET

20211007_133713.png

The 7-PC PLATINUM SERIES SET is the ultimate value package Piranha Abrasives has to offer. The kit includes 5 of our most popular sized Vacuum Brazed Coring Bits, a Vacuum Suction Stainless Steel Drill Guide, and a Piranha Tooth Hex Shaft Adaptor.

Coring Bit Sizes
- 6mm
-12mm
-20mm
-25mm
-32mm

The Stainless Steel Drill Guide is helpful for coring holes from less than 1/4” to as large as 2 1/2”. Additionally, the Piranha Tooth Hex Shaft Adaptor can convert these grinder bits into highly functional tools for drill.

If you are interested in the PAVB-7PC, click one of the following buttons.

CODES

PAVB-7PC

CONTENTS

6mm Coring Bit
12mm Coring Bit
20mm Coring Bit
25mm Coring Bit
32mm Coring Bit
Stainless Steel Drill Guide
Piranha Tooth Hex Shaft Adaptor

MACHINE TYPE

VARIABLE SPEED GRINDER

APPLICATION

DRY AND WET CORING

PLATINIUM SERIES VS MATERIAL GUIDELINE

The Chart above uses a rating system from 1 to 5. The rating value of 1 our lowest possible rating and the rating value of 5 is our highest possible rating.

VACUUM BRAZED SEGMENT

Vacuum brazing is a material joining technique that must be performed inside a vacuum chamber vessel. Temperature uniformity is maintained on the work piece when heating in a vacuum, greatly reducing residual stresses due to slow heating and cooling cycles. This, in turn, can significantly improve the thermal and mechanical properties of the material, thus providing unique heat treatment capabilities.

All of our PLATINIUM SERIES Bits combine the process of Vacuum Brazing and the use of Synthetic Diamond to help the coring bits better regulate heat while maintaining a consistent cutting quality.