PIRANHA VACUUM BRAZED TAPERED BORING BIT

PIRANHA TRIANGLE.png

The PAVBTBB is a unique tool, designed for boring out holes effectively and effortlessly. The bit utilizes the same Vacuum Brazing Technology used on our popular PAVBDB Coring Bits. This tool is fitted with a 5/8 x 11 Threaded mount, a 35/40 coarse grit, and was engineered for use on a Variable Speed Grinder.

If you are interested in the PAVBTBB, click one of the following buttons.


CODES

PAVBTBB

SIZE

3mm to 38mm

MACHINE TYPE

VARIABLE SPEED GRINDER

APPLICATION

DRY AND WET GRINDING

PAVBTBB VS MATERIAL GUIDELINE

The Chart above uses a rating system from 1 to 5. The rating value of 1 our lowest possible rating and the rating value of 5 is our highest possible rating.
PIRANHA+TRIANGLE.jpg

VACUUM BRAZED SEGMENT

Vacuum brazing is a material joining technique that must be performed inside a vacuum chamber vessel. Temperature uniformity is maintained on the work piece when heating in a vacuum, greatly reducing residual stresses due to slow heating and cooling cycles. This, in turn, can significantly improve the thermal and mechanical properties of the material, thus providing unique heat treatment capabilities.